background image

24

PRIUS PRIME_QG_OM47C92U_(U)

1. Charging operation

Inspecting and maintaining the charging 

cable

For safety, inspect the charging cable on a routine basis.

WARNING

Routine inspection

Check the following points regularly.
Failure to do so may cause an unexpected accident, resulting in death or
serious injury.

The  charging  cable,  plug,  charging  connector,  CCID  (Charging  Circuit
Interrupting Device) etc. have not been damaged

The outlet has not been damaged

The plug can be securely inserted into the outlet

The plug does not get extremely hot during use

The tip of the plug has not been deformed

The plug is not dirtied by dust etc.

Remove  the plug from  the outlet before  inspecting it. If  any abnormalities
are found in the charging cable as a result of the inspection, immediately
stop use and consult your Toyota dealer.

Maintaining the charging cable

When the charging cable is dirty, first remove the dirt with a hard, wringed
cloth, and then wipe the cable with a dry cloth. 
However,  never  wash  it  with  water.  If  the  charging  cable  is  washed  with
water, fire or electric shock may occur during charging, possibly resulting in
death or serious injury.

When not using the charging cable for a long time

Remove the plug from the outlet. Dust could accumulate on the plug or in
the outlet, possibly causing overheating which could lead to a fire.
Also, keep the cable in a place free from moisture.

Содержание Prius Prime









































Отзывы: