Toyota Prius Plug-inHybrid, Краткое руководство пользователя

Страница: 14 / 40

12
ELECTRIC VEHICLE SYSTEM
Charging
Step 1 Plug the charging cable into the outlet of the external power source.
NOTE: Hanging the CCID on a hook is recommended to reduce the strain on the
outlet and charging cable plug.
- Make sure to hold the body of the plug and insert
it firmly into the outlet.
- Check that the power indicator of the CCID
(Charging Circuit Interrupting Device) is
illuminated.
- The surface of the CCID may become hot, but this
does not indicate a malfunction.
Step 2 Press the test button on the CCID to check that the electrical leakage
detection function operates properly.
- If the error warning indicator illuminates when
test button is pressed, the function is operating
correctly.
- After the test is completed, press reset button to
turn off the error warning. Charging cannot occur
while error warning is illuminated.
- If the error warning indicator does not come
on when test button is pressed, the function
may not be operating correctly. Stop charging
immediately and contact your Toyota dealer.
Step 3 Press the charging port lid to open.
Step 4 Remove the charging connector cap. Affix the cap to the cable.
Step 5 Insert the charging cable connector into the charging inlet.
Step 6 Confirm that the charging indicator is illuminated. (When the charging
timer function is in use, the light will turn off several seconds after
illuminating.)
The Prius PHV may be charged immediately, or scheduled to charge at a specific
time. Before charging, it is recommended that:
-Parking brake is securely set
-All lights are turned off
-The POWER switch is OFF
Start charging
Refer to the Owner’s Manual for more details.
2013Prius-PHV.indd 12 10/11/12 12:30 AM