Toyota LAND CRUISER 2002 Скачать руководство пользователя страница 44

Страница: 44 / 123

When turning at a wrong intersection off

the designated route guidance.

If you are heading for a destination with-

out passing through a set way point, auto-

matic rerouting may display a route re-

turning to the set way point.

When turning at an intersection, there is

no route guidance.

When passing through the intersection,

there is no route guidance.

During automatic rerouting, the route

guidance may not be available for the next

turn to the right or left.

It may take a long time to operate auto-

matic rerouting during high speed driving.

In automatic rerouting, a detour route may

be shown.

During automatic rerouting, the route may

not be changed.

The route in a U

−

turn may be shown or

announced.

A location may have multiple names and

the system will announce one or more.

Some routes may not be searched.

If the route to your destination includes

gravel, unpaved roads or alleys, the route

guidance may not be shown.

Your destination point might be shown on

the opposite side of the street.

When a portion of the route has regula-

tions prohibiting the entry of the vehicle

that vary by time or season or other rea-

son.

The road and map data stored in your

navigation system may not be complete

or may not be the latest release.

When replacing the tire(s), contact your

dealer.

This navigation system uses the tire turning

data and is designed to work with factory

−

specified tires for your Toyota. Installing tires

that are larger or smaller than the originally

equipped diameter may cause inaccurate

display of the vehicle’s position. The tire

pressure also affects the diameter of the tires

so please make sure the tire pressure of all

four tires is correct.

(b) Inappropriate route guidance

may occur in the following

cases

Содержание LAND CRUISER 2002




























































































































Результаты поиска

Содержание LAND CRUISER 2002

Отзывы:

Похожие инструкции для LAND CRUISER 2002

Бренды по названию

Популярные бренды

Toyota LAND CRUISER 2002, Руководство пользователя

Результаты поиска

Содержание LAND CRUISER 2002

Отзывы:

Похожие инструкции для LAND CRUISER 2002

Бренды по названию

Популярные бренды