Toyota LAND CRUISER 2002 Скачать руководство пользователя страница 1

Страница: 1 / 123

Important information about this manual

For safety reasons, this manual indicates

items requiring particular attention with the

following marks.

CAUTION

This is a warning against something

that may cause injury to people if the

warning is ignored. You are informed

about what you must or must not do in

order to avoid or reduce the risk to

yourself and other people.

NOTICE

This is a warning against something

which may cause damage to the ve-

hicle or its equipment if the warning is

ignored. You are informed about what

you must or must not do in order to

avoid or reduce the risk of damage to

your vehicle and its equipment.

INFORMATION

This provides additional information.

Initial screen

UN001

When you start the engine or turn the ignition

key to ”ACC”, the initial ”TOYOTA” screen

appears and the system begins operating.

CAUTION

When the vehicle is stopped with the

engine running, always apply the park-

ing brake for safety.

After a few seconds, the ”CAUTION” screen

appears.

Содержание LAND CRUISER 2002




























































































































Результаты поиска

Содержание LAND CRUISER 2002

Отзывы:

Toyota LAND CRUISER 2002, Руководство пользователя, Страница: 1 / 123

Результаты поиска

Содержание LAND CRUISER 2002

Отзывы: