Toyota Land Cruiser 100 Скачать руководство пользователя страница 87

Страница: 87 / 249

New L/C100(U)

INTERIOR AND PERSONAL LIGHTS CUT
OFF OPERATION

When the ignition switch is ”OFF” and any
interior lights in the vehicle stay lighting
on, the lights will cut off automatically
after 30 minutes.

You can cancel the cut off operation by:

Turning the key to the ”ACC” position.

Opening or closing any of side doors
and back door

Turning off all the ”ON” lights.

All the lights are cut off when all the
doors are locked by key or wireless re-
mote control key.

The key must be in the ”OFF” position.

Ignition switch light

For easy access to the ignition switch,
the ignition switch light comes on when
the driver’s door is opened.

The light remains on for a certain time
after the driver’s door is closed.

It goes off immediately when the ignition
switch is turned to the ”ACC” position or
when all the side doors and back door are
locked.

Windshield wipers and washer

To turn on the windshield wipers, move
the lever to the desired setting.

The key must be in the ”ON” position.

Lever position

Speed setting

Position 1

Intermittent

Position 2

Slow

Position 3

Fast

The ”INT TIME” band lets you adjust the
wiping time interval when the wiper lever
is in the intermittent position (position 1).
Twist the band upward to increase the
time between sweeps, and downward to
decrease it.

Содержание Land Cruiser 100


























































































































































































































































Результаты поиска

Содержание Land Cruiser 100

Отзывы:

Бренды по названию

Популярные бренды

Toyota Land Cruiser 100, Руководство по эксплуатации

Результаты поиска

Содержание Land Cruiser 100

Отзывы:

Бренды по названию

Популярные бренды