Toyota Highlander Hybrid 2020, Руководство пользователя

Страница: 140 / 572

140
3-2. Opening, closing and locking the doors
HIGHLANDER HV_U
■ Jam protection function
Sensors are installed on the right
and left sides of the power back
door. When the door is automati-
cally closing and the sensors are
pushed due to an object being
clamped, etc., the jam protection
function operates.
From that position the door auto-
matically moves a little in the oppo-
site direction and then the function
stops.
■ Back door reserve lock function
This function reserves the locking of
the power back door when the
power back door is open. If the fol-
lowing operations are performed, all
of the doors except the power back
door will lock and then the power
back door will lock when it is com-
pletely closed.
1
Close all of the doors, except the
back door.
2
Perform an automatic closing
operation of the power back door
and lock the doors using the
wireless remote control
(

P.131) or smart key system
(

P.131) while the power back
door is closing.
A buzzer sounds and the emer-
gency flashers flash to indicate that
all the doors have been closed and
locked.
● If the electronic key is placed
inside the vehicle after starting a
close operation via the door
reserve lock function, the elec-
tronic key may become locked
inside the vehicle.
● If the back door does not fully
close due to the operation of the
jam protection function, etc., while
the back door is automatically
closing after a door reserve lock
operation is performed, the door
reserve lock function is canceled
and all the doors will unlock.
● Before leaving the vehicle, make
sure that all the doors are closed
and locked.
■ Kick sensor operating condi-
tions (vehicles with a Hands
Free Power Back Door)
● When the kick sensor operation
setting is turned on (

P.526) and
the power switch is turned off.
● When an electronic key is carried
within the operation detection
area.
■ Situations in which the Hands
Free Power Back Door may not
operate properly (if equipped)
In the following situations, the
Hands Free Power Back Door may
not operate properly:
● When a foot remains under the
rear bumper.
● If the rear bumper is strongly hit
with a foot or is touched for a
while.
If the rear bumper has been touched
for a while, wait for a short time
before attempting to operate the
Hands Free Power Back Door
again.
● When standing excessively close
to the rear bumper.
● When an external radio wave
source interferes with the commu-
nication between the electronic
key and the vehicle. (

P.147)
● When the vehicle is parked near
an electrical noise source which
affects the sensitivity of the Hands
Free Power Back Door, such as a
pay parking spot, gas station,
electrically heated road, or fluo-
rescent light.
● When the vehicle is near a TV
tower, electric power plant, radio