Toyota Highlander guide Скачать руководство пользователя страница 610

Страница: 610 / 732

610

8-2. Steps to take in an emergency

HIGHLANDER_U (OM0E017U)

WARNING

■

Using the tire jack

Observe the following precautions.

Improper use of the tire jack may cause the vehicle to suddenly fall off

the jack, leading to death or serious injury.

●

Do not use the tire jack for any purpose other than replacing tires or

installing and removing tire chains.

●

Only use the tire jack that comes with this vehicle for replacing a flat

tire.

Do not use it on other vehicles, and do not use other tire jacks for

replacing tires on this vehicle.

●

Put the jack properly in its jack point.

●

Do not put any part of your body under the vehicle while it is supported
by the jack.

●

Do not start the engine or drive the vehicle while the vehicle is sup-
ported by the jack.

●

Do not raise the vehicle while someone is inside.

●

When raising the vehicle, do not put an object on or under the jack.

●

Do not raise the vehicle to a height greater than that required to
replace the tire.

●

Use a jack stand if it is necessary to get under the vehicle.

●

When lowering the vehicle, make sure that there is no-one near the

vehicle. If there are people nearby, warn them vocally before lowering.

Содержание Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Highlander guide

Отзывы:

Похожие инструкции для Highlander guide

Бренды по названию

Популярные бренды

Toyota Highlander guide, Руководство по обслуживанию

Результаты поиска

Содержание Highlander guide

Отзывы:

Похожие инструкции для Highlander guide

Бренды по названию

Популярные бренды