Toyota COROLLA CROSS HYBRID 2020 Скачать руководство пользователя страница 45

Страница: 45 / 456

1-2. Child safety

For safety and security

COROLLA CROSS HYBRID_Kouzui_GE

WARNING

●

Only put a forward-facing child

restraint system on the front seat

when unavoidable. When installing

a forward-facing child restraint on

the front passenger seat, move the

seat as far back as possible. Failing

to do so may result in death or seri-

ous injury if the airbags deploy

(inflate).

●

Vehicles with SRS side and curtain

shield airbags: Do not allow the

child to lean his/her head or any

part of his/her body against the

door or the area of the seat, front,

side or rear pillars, or roof side rails

from which the SRS side airbags or

SRS curtain shield airbags deploy

even if the child is seated in the

child restraint system. It is danger-

ous if the SRS side and curtain

shield airbags inflate, and the

impact could cause death or seri-

ous injury to the child.

●

When a junior seat (booster seat) is

installed, always ensure that the

shoulder belt is positioned across

the center of the child’s shoulder.

The belt should be kept away from

the child’s neck, but not so that it

could fall off the child’s shoulder.

COROLLA CROSS HYBRID_OM_General_OM16537E

Содержание COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Результаты поиска

Содержание COROLLA CROSS HYBRID 2020

Отзывы:

Похожие инструкции для COROLLA CROSS HYBRID 2020

Бренды по названию

Популярные бренды

Toyota COROLLA CROSS HYBRID 2020, Руководство пользователя

Результаты поиска

Содержание COROLLA CROSS HYBRID 2020

Отзывы:

Похожие инструкции для COROLLA CROSS HYBRID 2020

Бренды по названию

Популярные бренды