Toyota Celica 2002 Скачать руководство пользователя страница 62

Страница: 62 / 231

’02MY CELICA U (L/O 0108)

2002 MY CELICA_U (OM20792U)

To adjust a mirror, use the switches.

1. Master switch—To select the mirror to

be adjusted
Push the “L” (left) or “R” (right) switch.

2. Control switch—To move the mirror

Push the switch in the desired direc-
tion.

Mirror can be adjusted when the key is in
the “ACC” or “ON” position.

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-
ror face. Use a spray de–icer to free
the mirror.

The rear view mirrors can be folded
backward for parking in restricted
areas.

To fold the rear view mirror, push back-
ward.

CAUTION

Do not drive with the mirrors folded
backward. Both the driver and pas-
senger side rear view mirrors must
be extended and properly adjusted
before driving.

Adjust the mirror so that you can just
see the rear of your vehicle in the mir-
ror.

To reduce glare from the headlights of
the vehicle behind you during night
driving, operate the lever on the lower
edge of the mirror.

Daylight driving—Lever at position 1

The reflection in the mirror has greater
clarity at this position.

Night driving—Lever at position 2

Remember that by reducing glare you also
lose some rear view clarity.

—Power rear view mirror
control

—Folding rear view mirrors

Anti–glare inside rear view
mirror

Содержание Celica 2002








































































































































































































































Результаты поиска

Содержание Celica 2002

Отзывы:

Бренды по названию

Популярные бренды

Toyota Celica 2002, Руководство по эксплуатации

Результаты поиска

Содержание Celica 2002

Отзывы:

Бренды по названию

Популярные бренды