Toyota C-HR2018, Руководство пользователя

Страница: 91 / 516

91
2. Instrument cluster
2
Instrum
e
nt clus
ter
C-HR_OM_USA_OM10526U
●
Distance (driving range/after start)
*
1
Displays the estimated maximum distance that can be driven with the
quantity of fuel remaining and the distance driven after the engine was
started, respectively
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
●
Eco Driving Indicator Zone Display
→
P. 94
● Speedometer
Displays the vehicle speed.
●
G Monitor
→
P. 95
● Sway warning (if equipped)
Detects the sway of the vehicle within a lane, which is often associated
with a decrease in the driver’s attention level, and displays the decrease in
attention using a bar display.
The shorter the bar length, the more the driver may need to rest.
This display is a part of the LDA (Lane Departure Alert with steering con-
trol). The display is enabled when the operating conditions of the vehicle
sway warning are met. (
→ P. 226)
●
Display off
A blank screen is displayed.
*
1
: Can be registered to Drive information 1 and 2. ( → P. 92)
*
2
: Resetting procedures:
• Select a function to be reset using the meter control switches and then
press and hold to reset.
• If there is more than one function that can be reset, check boxes will be
displayed next to those functions.