Toyota C-HR, Краткое руководство пользователя

Страница: 28 / 48

26
CHANGING PCS ALERT TIMING
TOYOTA SAFETY SENSE
™
(1) Press “ ” switches and select from the Multi-Information Display (MID).
(2) Press “ ” switches and select the setting function and then press “ ”.
The setting screen is displayed.
(3) Press “ ” switches and select “
Sensitivity” from the MID and then press
“ ” to select the desired setting. You can press “ ” to go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On. The
system can be disabled/enabled and the alert timing of the system can be changed.
(Alert timing only, brake operation remains the same).
Far
Middle
(default)
Near
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
Refer to the Toyota Owner’s Manual for additional limitations and information.
Under certain conditions, the PCS system included with the TSS-P package may
also help to detect a pedestrian in front of your vehicle using the in-vehicle camera
and front grille-mounted radar. The in-vehicle camera of PCS detects a potential
pedestrian based on size, profile, and motion of the detected pedestrian. However,
a pedestrian may not be detected depending on the conditions, including the
surrounding brightness and the motion, posture, size, and angle of the potential
detected pedestrian, preventing the system from operating or engaging.
PCS PEDESTRIAN DETECTION