IN-CAR ENTERTAINMENT SYSTEM
Troubleshooting Guide
Note: For the voltage check of *A-*L, please see connector assignment table on pages 17 & 18.
5
06-04
PROBLEM 1: DISPLAY CANNOT BE TURNED ON
Is the ignition key ON or turned to ACC?
SET THE IGNITION KEY TO ON OR ACC.
Is the display turned on?
Confirm if the display is not in sleep
mode by special wake up procedure(*).
APPLY THE WAKE UP PROCEDURE (*)
MAX 10 TIMES.
REPLACE THE SCREEN.
REINSERT THE CONNECTORS
PROPERLY.
Does power supply come to 4P
connector?
EXCHANGE THE SEAT HARNESS.
REPLACE THE SCREEN.
Insert the display in a working system
(other seat/car). Does it play?
YES
Is contact of each connector normal?
Is power supply carried out from the
screen control box?
Does power supply come to
15P screen connector?
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
NO
EXCHANGE
THE SCREEN CONTROL BOX.
A
B
C
After a storage period, the monitor may go into "sleep" mode. To
reactivate the monitor, please complete the following actions:
Switch the monitor on using the POWER-ON button.
Wait 5 seconds.
Switch off by pressing the same button and holding it for 5-6 seconds.
Repeat until the monitor activates.
(*)
IMPORTANT
