Toyota Avalon 2002, Руководство пользователя

Страница: 198 / 311

’02 AVALON U (L/O 0107)
194
2002 MY AVALON_U (OM22493U)
The garage door opener ( HomeLink
Universal Transceiver) is manufactured
under license from HomeLink and can
be programmed to operate garage
doors, gates, entry doors, door locks,
home lighting systems, and security
systems, etc.
(a) Programming the HomeLink
The HomeLink in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
HomeLink , install a new battery in the
hand − held transmitter prior to program-
ming.
The battery side of the hand
− held trans-
mitter must be pointed away from the
HomeLink during the programming pro-
cess.
For Canadian users, follow the procedure
in “Programming an entrance gate/Pro-
gramming all devices in the Canadian
market”.
1. Decide which of 3 HomeLink buttons
you want to program.
2. Place your hand − held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
the surface of the HomeLink .
Keep the indicator light on the HomeLink
in view while programming.
3. Simultaneously press and hold the
hand − held garage transmitter button
along with the selected HomeLink but-
ton.
4. When the indicator light on the
HomeLink changes from a slow to a
rapid flash after 20 seconds, you can
release both buttons.
5. Test the operation of the HomeLink by
pressing the newly programmed button.
If programming a garage door opener,
check to see if the garage door opens
and closes.
If the garage door does not operate, iden-
tify if your garage transmitter is of the
“Rolling Code” type. Press and hold the
programmed HomeLink button. The ga-
rage door has the rolling code feature if
the indicator light (on the HomeLink )
flashes rapidly and then remains lit after
2 seconds. If your garage transmitter is
the “Rolling Code” type, proceed to the
heading “Programming a rolling code sys-
tem”.
6. Repeat steps 2 through 5 for each re-
maining HomeLink button to program
another device.
Garage door opener