Toyota 5FDC Series, Руководство пользователя

Страница: 9 / 34

PRECOAT BOLTS
I
(Bolts coated seal lock agent on threads)
I
1 Do not use the precoat bolt as it
any of the
cases
I
)
When the precoat bolt removed
When the precoat bolt moved
(loosened or tightened) rn
check etc
Reference :
The tightening torque must be checked
84460
with the lower limit of the allowable
tightening toque range. If the bolt moves,
retighten it according to the following
procedure:
2.
Reusing the precoat bolt
Clean the bolt and threaded hole. Dry the precoat bolt sufficiently by
(Clean the threaded hole even blowing, etc
when the precoat bolt to be
( 3 )
Coat the specifred seal lock agent
replaced.
on the theaded hole for the bolt.
PRESSURE HOSE TIGHTENING TORQUE
1. Before connecting a pressure hose, wipe the high pressure hose fitting and mating
contact surfaces with clean cloth to remove foreign matters and dirt. Check that there no
dent or other surface defect on the contact surface.
2. the high pressure hose and nrpple and hold the hose that the state during
tightening.
3 . The maximum torque must not exceed twice the standard torque.
Hose
diameter
m m
of screw
7/16 1 8 1 )
9/16 3 6 2 )
3 / 4 6 0 43 3)
Standard torque
kg-cm
2 4 - 1 8 8 ) 6
4 8 - 5 3 1 3 4 7 - 3 8 3 ) 9
5 7 - 2 - 4 5 5 ) 12
Standard range
7/8 6 0 ( 4 3 3 ) 5 7 - 12
8 6 6 ) 91 0) 19
1) 25
3 6 2 ) 4 8 - 3 8 3 )
5 0 ( 3 6 2 ) 4 8 - 3 8 3 )
9
9
PF 1
5 7 - 2 - 4 5 5 )
,
12
91 0 ) 19
I
1 3 3 - 1 4 7 1 9 6 0 - 1 0 6 1 ) 2 5