Toyota 4Runner 1997, Руководство по эксплуатации

Страница: 48 / 221

WWW.MANUALS.WS
WWW.MANUALS.WS
52
If your child restraint system requires
the use of a top strap, latch the hook
onto the anchor bracket and tighten
the top strap.
See the following instructions to install the
anchor bracket.
On the filler panel behind the rear seat
a.
Using the illustration as a guide, run
your fingers across the trim of the filler
panel itself to locate the position of the
holes underneath.
b.
Make a hole in the covering deirctly
above the hole in the filler panel.
c.
Insert a 15 mm (0.6 in.) spacer and
tighten down the anchor bracket for your
child restraint system with a bolt. Torque
the bolt to 16.5—24.7 N
⋅
m (1.68—2.52
kgf
⋅
m 12.2—18.2 ftlb
⋅
ft).
To comply with Canada Motor Vehicle
Safety Standards, vehicles sold in Cana-
da are provided with a bracket set in the
glovebox, designed for use with any of the
3 anchor locations shown in the illustra-
tion.
If your child restraint system does not pro-
vide any of the necessary parts, ask your
Toyota dealer. (See “—child restraint sys-
tem”.)
—Top strap anchors and
locations