Toyota 2016 Prius, Краткое руководство пользователя, Страница: 37 / 56

35
If you are already using Full-Speed DRCC “ ”, push “ON-OFF” button to turn the
system off first then push and hold - button for at least 1. seconds to
switch.
Note: hen the engine is turned off it will automatically default to ull- peed
Dynamic adar Cruise Control.
(3)
Acceleration when there are no longer any preceding vehicles driving
slower than the set speed
The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
Conditions where Automatic High Beams will turn ON/OFF automatically
hen all of these conditions are met high beams will be automatically turned on
after appro imately 1 second
ehicle speed is above appro imately mph m h .
The area ahead of the vehicle is dar .
There are no oncoming or preceding vehicles with headlights or tail lights
turned on.
f any of these conditions occur high beams will be automatically turned off
ehicle speed drops below appro imately 1 mph m h .
The area ahead of the vehicle is not dar .
ncoming or preceding vehicles have headlights or tail lights
turned on.
There are many streetlights on the road ahead.
Activating the Automatic High Beam System
1 ith the engine switch in T mode and headlight switch turned to
A T position depress the Automatic igh Beam switch and push lever
away from you.
The Automatic igh Beam indicator will come on when the headlights are
turned on automatically to indicate that the system is active.
Pull the lever bac toward you to turn the Automatic igh Beam system off.
The Automatic igh Beam indicator will turn off and the high beam indicator
turn on.
The Automatic igh Beam uses an in-vehicle camera sensor to assess the
brightness of streetlights the lights of oncoming and preceding vehicles etc. and
automatically turns high beam on or off as necessary.
Auto High Beams (AHB) (if equipped)
AT
AD
C
AT
TOYOTA SAFETY
SENSE
ATPAT
134261_Prius_QRG_GUTS.indd 35 12/18/15 1:33 PM