Toyota 2007 Highlander Скачать руководство пользователя страница 77

Страница: 77 / 439

’07 HIGHLANDER_U (L/O 0608)

2007 HIGHLANDER from July ’06 Prod. (OM48682U)

To flatten the seatbacks, do the follow-

ing:

1. Hold the center of the lever and pull

it up, sliding the second seat to the
rear

−

most position. Then pull the

seat forward slightly until it locks.

2. Remove the head restraint. Push the

seat position adjusting switch for-
ward to slide the front seat to the

front

−

most position.

3. Move the seatback angle adjusting

switch backward to flatten the seat-
back.

After returning the seat to its original
position, be certain to replace the head

restraint.

Flattening seatbacks

(power seat)

Содержание 2007 Highlander
























































































































































































































































































































































































































































Результаты поиска

Содержание 2007 Highlander

Отзывы:

Toyota 2007 Highlander, Руководство пользователя, Страница: 77 / 439

Результаты поиска

Содержание 2007 Highlander

Отзывы: