Toyota 2005 HIGHLANDER Скачать руководство пользователя страница 93

Страница: 93 / 430

’05 HIGHLANDER_U (L/O 0409)

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

This indicator comes on when the igni-

tion key is turned to the “ON” position.
It goes off after about 6 seconds. This

means the seat belt pretensioners are

operating properly.

This warning light system monitors the

airbag sensor assembly, front airbag sen-

sors, side and curtain shield airbag sen-
sors, curtain shield airbag sensors, driv-

er’s seat position sensor, driver’s seat belt

buckle switch, front passenger occupant
classification system, “AIRBAG ON” indi-

cator light, “AIRBAG OFF” indicator light,

front passenger’s seat belt buckle switch,
seat belt pretensioner assemblies, inflat-

ors, warning light, interconnecting wiring

and power sources. (For details, see “Ser-
vice reminder indicators and warning buzz-

ers” on page 135 in Section 1

−

6.)

If any of the following conditions occurs,
this indicates a malfunction of the airbags

or seat belt pretensioners. Contact your

Toyota dealer as soon as possible.

The light does not come on when the

ignition key is turned to the “ON” posi-
tion or remains on for more than 6

seconds or flashes.

The light comes on or starts flashing

while driving.

If any seat belt does not retract or
cannot be pulled out due to a malfunc-

tion or activation of the relevant seat

belt pretensioner.

The seat belt pretensioner assembly or

surrounding area has been damaged.

In the following cases, contact your Toyota

dealer as soon as possible:

The front of the vehicle (shaded in the

illustration) was involved in an accident
that was not severe enough to cause

the seat belt pretensioners to operate.

Either seat belt pretensioner assembly
or surrounding area is scratched,

cracked, or otherwise damaged.

Содержание 2005 HIGHLANDER















































































































































































































































































































































































































































Результаты поиска

Содержание 2005 HIGHLANDER

Отзывы:

Похожие инструкции для 2005 HIGHLANDER

Бренды по названию

Популярные бренды

Toyota 2005 HIGHLANDER, Руководство пользователя

Результаты поиска

Содержание 2005 HIGHLANDER

Отзывы:

Похожие инструкции для 2005 HIGHLANDER

Бренды по названию

Популярные бренды