Toyota 2004 ECHO Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 263

Toyota 2004 ECHO Скачать руководство пользователя страница 34

26

2004 ECHO S/D from Feb. ’04 Prod. (OM52573U)

The  system  will  automatically  be  set  after
30  seconds.  When  the  system  is  set,  the
indicator  light  will  start  flashing  again.

4. After making sure the indicator light

starts flashing, you may leave the ve-
hicle.

Never  leave  anyone  in  the  vehicle  when
you  set  the  system,  because  unlocking
from  the  inside  will  activate  the  system.

WHEN THE SYSTEM IS SET

Activating the system

The system will sound the alarm under
the following conditions:

!

If  any  of  the  doors  is  unlocked  or  if
the  trunk  or  hood  is  forcibly  opened
without  the  key

!

If the battery terminal is disconnected
and then reconnected

The indicator light will come on when the
system is activated.

If  any  of  the  doors  are  unlocked  without
the  key  and  the  key  is  not  in  the  ignition
switch,  all  the  doors  will  be  automatically
locked  again.

After  one  minute,  the  alarm  will  automati-
cally  stop  and  the  indicator  light  will  starts
flashing  again.

Reactivating the alarm

Once set, the system automatically resets
the alarm after the alarm stops.

The alarm will activate again under the
same

circumstances

described

in

“Activating the system”.

Stopping the alarm

The alarm will be stopped by the following
three ways:

!

Turn the ignition key from the “LOCK”
to “ON” position.

!

Unlock any of the doors with the key.

!

Open the trunk with the key.

CANCELLING THE SYSTEM

The system will be cancelled by the
above mentioned 3 ways.

If  the  tail  lights  come  on  for  2  seconds,
the  theft  deterrent  system  has  been
alarmed.  Check  to  see  if  there  is  any
abnormality  with  your  vehicle.

TESTING THE SYSTEM

1. Open all the windows.

2. Set the system as described above.

The  doors  should  be  locked  with  the
key.  Be  sure  to  wait  until  the  indicator
light  goes  off  or  starts  flashing.

3. Unlock any door from the inside. The

system should activate the alarm.

4. Stop the alarm as described above.

5. Repeat this operation for the other

doors,  trunk  and  hood.  When  testing
the  hood,  also  check  that  the  system
is  activated  when  the  battery  terminal
is  disconnected  and  then  reconnected.

If the system does not work properly,
have it checked by your Toyota dealer.

04 01.06

«
...
32
33
34
35
36
...
»

Содержание 2004 ECHO








































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды