TownSteel e-Elite 3000, Руководство по установке

Страница: 15 / 16

Troubleshoot
Problem Cause Solution
Keypad does not light up. Batteries are dead.
Keypad is locked out due to
amount of incorrect codes
Not fully plugged in wires or
pinched wires.
Replace batteries by removing
back cover.
Wait 60 seconds and try again.
Check wire connection.
Issues retracting latch.
Keypad lights up but motor
does not respond.
Latch tail piece did not fully
engage lock body retractor.
Motor wire is not fully plugged
in or has been pinched.
Motor wire was plugged into
the wrong plug.
See Step 2.
Undo the back cover and
inside assembly. Inspect the
motor wire.
See Step 4.
14