TownSteel 2000 Series, Руководство пользователя

Страница: 17 / 20

www.townsteel.com
-16-
Code Location Function - Program 09
□
#
[Master Code]
● □
0
□
9
●
[Enter Code to be located]
●●
Result:
If the code entered is recognized, the following sequence will occur:
1. At the start of the Code Location sequence, the lock will Flash both the Blue and RED LEDs and emit 2 beeps.
2. The lock will identify the first digit by flashing the Blue LED and beeping the sounder from 0
– 9 times.
3. To signify the end of the first digit sequence, the lock will flash both the Blue and RED LEDs and will emit 2 beeps.
4. The lock will identify the second digit by flashing the Blue LED and beeping the sounder from 0
– 9 times.
5. To signify the end of the Code Location function, the lock will flash both the Blue and RED LEDs and will emit 2 beeps.
Note:
Should the Code not be recognized, the lock will sound one long beep (0.5 sec) with a RED LED.
Next Free Office Code ID Locator - Program 10
□
#
[Master Code]
● □
1
□
0
●●
Report Sequence
1. At the start of the Next Free Office Code Location function, the lock will flash both the Blue and RED LEDs and will emit 2 beeps.
2. The lock will identify the first digit by flashing the Blue LED and beeping the sounder from 0 -9 times.
3. To signify the end of the first digit sequence, the lock will flash both the Blue and RED LEDs and will emit 2 beeps.
4. The lock will identify the second digit by flashing the Blue LED and beeping the sounder from 0 -9 times.
5. To signify the end of the Office Code Location function, the lock will flash both the Blue and RED LEDs and will emit 2 beeps. If no
free address is found, then the lock will emit one long beep (0.5 sec) with a Red LED.