Town ECODECK Скачать руководство пользователя страница 1

CHINESE WOK RANGE OWNER

S MANUAL

SECTION 1  INSTALLATION INSTRUCTIONS

When sold in the Commonwealth of Massachusetts this unit must be equipped with an interlock 

to prevent operation only if the hood system is operational. Installation of the interlock is the 

responsibility of the installer—it is not supplied by the factory. 

WARNING

Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. 

Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.

FOR YOUR SAFETY

Do not store or use gasoline or other fl ammable vapors and liquids in the vicinity of this or any other appliance.

IMPORTANT

Contact your local gas supplier for instructions if you smell gas near this equipment. 

FOR COMMERCIAL USE ONLY

© Town Food Service Equipment Company, Inc. No part of this booklet or it 

s illustrations may be copied or reproduced without written authorization from Town Food Service Equipment Co., Inc.

6/14

DO NOT DISCARD INSTRUCTIONS. THIS MANUAL MUST REMAIN WITH THE UNIT FOR FUTURE REFERENCE.

THIS EMERGENCY INFORMATION MUST BE PROMINENTLY DISPLAYED.

Содержание ECODECK

























Отзывы: