The gas control system is located on the right hand side of the fi rebox behind an access
panel and the decorative fi rebox panel (if installed). The fi replace is operated via a wall
control and a hand held remote control unit.
The wall control is connected to the fi replace by a 25 ft. communication cable supplied with the
fi replace. The communication cable can be extended with an optional 25 ft. extension kit.
Installation
1. Place the fi replace in the desired location.
2. Remove the window from the fi replace.
3. Remove access panel from right hand side of the fi rebox (Fig #17)
4.
Connect a 110 V. AC electrical supply to the outlet installed inside the control box
(Fig
#18)
5. Connect the gas supply to each of the valves (Fig #19)
(See gas supply section)
6. Plug the A/C adaptors into the outlet (Fig #20)
7.
Attach the electrical box for the supplied wall control to the framing in the desired
location (up to 50 ft. away). (25 ft is supplied with fi replace. An additional 25 ft can
be achieved by using the optional kit (Part # 5005.064) available from your
distributor).
Fig. #18
Fig. #19
Fig. #20
Fig. #17
ACCESS PANEL
OUTLET
GAS CONNECTIONS
A/C ADAPTERS
13
TC54.CE2 080211-36
Maestro Control
– Plumbing and Electrical
