Propane Conversion
Note: This fireplace comes with a
preinstalled Honeywell pilot. When installing
the burner assembly, remove the pilot that
came attached to the burner and discard.
DO NOT USE ANY OTHER PILOT WITH
YOUR OUTDOOR UNIT OTHER THAN THE
HONEYWELL PILOT THAT CAME INSTALLED
IN THE FIREPLACE.
1. Remove the compression fitting from the
bottom of the orifice housing and gently tap
the pilot in your hand. The natural gas orifice
should fall out (Figure 1).
2. Insert the propane orifice that came in
your instruction pack as shown into the
orifice housing and reattach the pilot to the
compression fittng and pilot tube (Figure 2
and Figure 3).
3. Using the valve conversion kit that came in
the instruction pack, convert the valve to
propane following the instructions provided
with the kit (Figure 4).
Orifice housing
Compression fitting
Figure 1: Removing NG orifice.
Orifice housing
Orifice
Compression
fitting
Figure 2: Orifice insert.
Orifice
Figure 3: Orifice.
Figure 4: Valve conversion kit.
6
TC36.CODE_271119-40
100003879
