Tower Hobbies Vista Скачать руководство пользователя страница 15

Страница: 15 / 16

OTHER ITEMS AVAILABLE FROM

TOWER HOBBIES

Tower Hobbies 4-TH 4-Channel FM Radio

The 4-TH is as affordable as it is perfect for first-time and

sport fliers. Narrow-band FM technology and a dual-

conversion receiver ensure that reception is as interference-

resistant as the transmission. Rounded transmitter contours

take it easy on the hands, while length and tension

adjustments tailor all-important stick “feel” to your own

needs. Servo reversing adds installation ease to the list of

conveniences, which also includes easy-to-reach trims,

600mAh Tx and Rx NiCds, a dual-output charger, Futaba

J-compatible connectors – and a trainer system to make it

easy to teach flying skills or learn new ones. Requires

servos. 1-year warranty. 72MHz.

TOWJ41**

DYNAFLITE

™

HI-STARTS

DYFP8301 (Standard)
DYFP8302 (Heavy-Duty)

A Dynaflite Hi-Start and 800' of clear launch area are all you

need to send your sailplane rocketing up to 500' in the air!

Easy to lay out and retrieve, Hi-Starts include everything

required for sailplane launches: 100' of UV-stabilized

surgical tubing, injection-molded reel, parachute, steel stake

and tow ring, and nylon tow line. Standard Hi-Start with 1/8"

diameter tubing offers strong, steady power for 2-meter

sailplanes. Heavy-Duty Hi-Start with 3/16" diameter tubing

provides the launch power needed for sailplanes spanning

100" or more.

Great Planes C.G. Precision Aircraft Balancer

™

Accurate balancing makes trainers more stable, low-wings

more agile, and pylon planes move at maximum speed. The

innovative C.G. Machine helps you achieve optimum balance

easily, without measuring or marking–and without the errors

that fingertip balancing can cause. You’ll quickly pinpoint your

plane’s exact center of gravity. Then you’ll know at a glance

whether weight should be added, removed or relocated. The

C.G. Machine works with kits and ARF models of any size and

wingspan. Its slanted wire balancing posts support models

weighing up to 40 pounds.

GPMR2400

Cut out or copy the identification tag and put it on or inside

your model.

Содержание Vista

















Результаты поиска

Содержание Vista

Отзывы:

Похожие инструкции для Vista

Бренды по названию

Популярные бренды

Tower Hobbies Vista, Руководство пользователя

Результаты поиска

Содержание Vista

Отзывы:

Похожие инструкции для Vista

Бренды по названию

Популярные бренды