12
Note:
Ensure the carpet cleaner is turned off and unplugged from the mains before
carrying out any cleaning or maintenance.
Cleaning the Unit:
1. Clean the unit and accessories with a soft, damp cloth and allow it to dry fully
before attempting to use it again.
2. Do not use any harsh cleaners or chemicals with the unit, as this may cause
damage to the outer surfaces.
CAUTION!
DO NOT allow water to enter any part of the unit other than the water
tank, as this could cause damage to the internal components.
Emptying the Water Tank:
1. This unit is equipped with an automatic shut-off device, which prevents the
carpet cleaner from picking up more water than the water tank can hold. The
dirty water tank will need emptying when the motor gives off a high-pitched
sound, the float inside the water tank has risen to the surface, or when dirty
cleaning solution can no longer be seen through the water tank lid. When this
occurs, follow the steps below to empty and refresh the unit’s water tank.
2. To remove the dirty water tank from the carpet cleaner, firmly grip it and pull
back on the tab on the main body of the unit to release the water tank handle.
Once the tank handle has been unlocked, tilt the tank away from the main
body of the unit until it detaches.
3. When the water tank has been detached from the unit, unscrew the cap by
turning it counter-clockwise. Once the cap has been removed, empty the
water tank. When the tank is empty, replace the tank cap and turn it clockwise
to tighten it and secure it into place.
4. When the tank has been emptied and securely closed up with the safety cap,
push it back into position inside the main body of the unit and secure it by
pushing the handle downwards and into the locking tab until it clicks into
place.
5. The unit is now ready for normal use.
UNLO
CK
LOCK
8 - Cleaning & Care
Step 1
Step 2
Step 3