T80206/T80207/T80208 Aluminium Pressure Cooker
6
www.towerhousewares.co.uk
REPLACEMENT OF CONSUMABLE PARTS
To avoid leakage or failure, please dismantle or replace
the spring safety valve in the order of the illustrated
picture, Fig 9. To wash, take the acorn nut out, with a
screwdriver, then remove the lifting cap and the valve
core and spring. After washing, put it back in the reverse
order.
PLEASE NOTE
1. Never open the cover forcibly when the indicating
valve has not been released.
2. If the regulator has become blocked during the
cooking process, the pressure must be reduced
by the manual release valve. Now open the cover
and clear the regulator in order for it to be used again.
3. If the pressure cooker has not been used for a period
of time, always check the safety lock before use.
4. While in operation, NEVER remove the pressure
limiting valve, do not put any weight on it NOR use
anything else, other than the pressure limiting valve
supplied.
5. In order to ensure safety, NEVER use any other
sealing ring, other than the sealing ring supplied.
6. Do not lift the manual release valve to lower the
pressure when cooking.
7. Whilst cooking, AVOID knocking the pressure cooker
as the contents are under pressure and will damage
the cooker. Should you experience any problems,
please take your pressure cooker to the nearest
service agent, or a suitably qualified person.
Lifting Cap
Valve Core
Spring
Rubber Gasket
Acorn Nut
Fig 9
T80206/T80207/T80208 Tower Series 2 Pressure Cooker Manual.indd 6
29/05/2014 09:10
