Safety and Instruction Manual
7
Helpline: +44 (0) 844 984 0055
USING YOUR APPLIANCE:
Automatic centring guides
Lowering the toasting lever closes the centring guides and holds the
bread or toaster food centrally in the toasting slots.
Note: The toasting lever will not lock down unless the toaster is plugged
into an electrical outlet.
Toasting Instructions
1. Make sure crumb trays are pushed all the way into the back of the
Toaster and the toasting levers are in the UP position.
2. Make sure no bread or other objects are inside the toasting slots.
Place Toaster on a flat, level, heat resistant surface.
3. Plug the power cord into a 220-240AC electrical outlet.
4. Position the browning selector knob to desired setting(s). To test
toasting times for browning, it is best to use both toasting slots’
position the browning selector knob between (3) and (4) medium;
then adjust each subsequent toasting to your preference.
5. Remove all protective wrappings from food before placing into the
toasting slot(s).
6. Insert bread or toaster food into the toasting slot(s). Lower the
toasting lever until locked into place. The automatic centring guides
hold food upright for uniform side-to-side toasting. When the bread
is lowered into position, toasting will begin.
NOTE: The toasting lever will not lock into position unless the
Toaster is plugged into a 220-240V AC electrical outlet.
When toasting a single slice, the bread may be placed in any
toasting slot.
To prevent a fire hazard, never place bread over the opening
of the Toaster, always place bread into the slots.
