Tower Hobbies T14028, Инструкция по эксплуатации

Страница: 8 / 18

8
• Read all of the instructions and retain them for future use.
• Remove all packaging material and any stickers.
• Wash removable parts and/or accessories as instructed in the Care and Cleaning
section.
• Wipe the Grill plates with a damp cloth or sponge to remove any dust. Wipe dry
with a soft cloth or paper towels.
• Select a dry, level location where the Grill will be used, leaving enough space
between the back of the BBQ and wall to allow heat to flow without damage
to walls.
• Lightly grease the Grill plate before the first use with some cooking oil.
• Before you insert the plug into an earth-connected wall socket, check if the
mains voltage complies with the information indicated on the type plate for the
appliance.
• Dispose of the packaging in a responsible manner.
Note: When your BBQ is heated for the first time, it may emit a slight amount
of smoke or odour. This is normal with many heating appliances due to small
amounts of manufacturing oil or dust particles that may have settled in transit.
This does not affect the safety of your appliance.
Ensure adequate ventilation, or heat the device up for the first time outdoors.
Before you barbecue for the first time, let the BBQ heat up and cool off twice
with an empty grill.
Assembling the BBQ:
1. Place the Grill tray on a dry, level surface.
2. Place the Grill plate onto the Grill tray so that both drains in the Grill plate and
the Grill tray are vertically aligned.
3. Make sure that the Grill plate has locked onto the Grill tray.
4. If the Grill plate is correctly in place you can now use the BBQ.
If you would like to use the BBQ outdoors, you should also mount the wind-screen
onto it.
• Place the side ends of the windscreen on the left or right side of the Grill tray.
• From above, push the back wall of the windscreen into the two windscreen
brackets on the back wall of the Grill tray.
• The windscreen is mounted and you can now use the BBQ Grill.
You can also use this BBQ Grill on a stand. A frame including a shelf (e.g. for
utensils) is included in the product contents.
Mount the frame as follows:
1. From below, insert one of the support legs through one of the openings at the
corners of the shelf.
2. Push the support leg up until the holes in the shelf and support leg are
vertically aligned.
4 - Before First Use
5 - Using Your Appliance