Safety and Instruction Manual
7
Helpline: +44 (0) 844 984 0055
USING YOUR APPLIANCE:
1. Place the cordless base on a firm and level surface.
2. Pour the desired amount of clean water into the kettle, Do not
touch any part of the kettle except the handle. When the appliance
is in use, and ensure that the cover is properly closed, The amount
of water can be measured by the level mark on the outside of the
kettle, Always pay attention to the minimum and maximum levels
and ensure that the cover is properly and firmly closed.
3. Position the kettle in such a way on the sub base that the underside
of the kettle fits precisely into the contact on the base.
4. Insert the plug into a wall socket.
5. Put the on/off switch to its ‘1’ position to start the heating process,
The indicator lamp will light up .
6. As soon as the water reaches boiling point, the on/off switch return
automatically to the “0” position, the indicator lamp will go out. The
water kettle can also be switched off manually by putting the on/off
switch to the “0” position.
7. The hot water may now be poured safely through the spout into
another container.
8. This kettle is equipped with a safety cut –out to protect the appliance
from damage in case of inappropriate use, should the appliance be
accidentally operated without water or if all the water has evaporated
the safety cut out will automatically switch off the heating element.
9. In such a case remove the plug from the wall socket immediately
and refill the kettle only after an adequate cooling down period,
about 15-20 second