7
Assembly:
1.
Carefully unpack the vacuum cleaner. Make sure all parts are included before discarding the
packaging.
2.
Insert the vacuum cleaner handle into the vacuum cleaner pole, aligning the two locking pins.
Push the two parts together until they lock.
3.
Connect the pole to the electric brush, aligning the two locking pins. Push the two parts
together until they lock.
4.
To detach the handle, press the button at the top of the pole.
Note:
Make sure the brushes are free of fibers, hairs and other objects that may interfere with their
proper operation. Always remove these types of objects when the brush catches them.
Using the Stick Unit:
Use the stick on smooth surfaces such as wood, ceramics, tiles and marble or on a carpet with short
bristles. It should NOT be used on long-haired carpets as the fibers will damage the system.
When you use the stick, always make sure that the dust compartment is attached to the handheld
vacuum cleaner.
1.
Connect the handheld vacuum cleaner to the stick, making sure that it snaps into place.
2.
Press and hold the on/off button on the handle for at least 3 seconds to switch on the appliance.
The LEDs on the body of the unit light up to indicate that the unit is on.
3.
Press the speed control button (“MAX”) on the top of the unit to toggle between high and low
speeds as required.
4.
To switch off the appliance, press the on/off button.
Note:
Use the handheld vacuum cleaner without the pole to vacuum small hard-to-reach areas,
such as tables, furniture or car seats.
1.
Press the handheld vacuum cleaner release button at the top of the pole and remove the
handheld vacuum cleaner.
2.
Press the on/off button for at least 3 seconds to switch on the appliance. The LEDs light up.
3.
Press the speed control button (“MAX”) on top of the unit to toggle between high and
low speeds.
4.
To switch off the appliance, press the on/off button.
Connecting the Accessories:
1.
The handheld vacuum cleaner comes with a 2-in-1 bristle brush and crevice tool, ideal for
vacuuming corners, narrow spaces, soft furnishings and delicate surfaces.
2.
To attach this attachment to the vacuum cleaner, push it into the main body of the appliance
until it clicks into place.
3.
To remove this accessory, press the accessory release button on the bottom of the suction pole
and pull the accessory out.
Note:
Make sure the brushes are free of fibers, hairs and other objects that may interfere with their
proper operation. Always remove them when this happens.
Fig. 3
Fig. 4
EN
