8
1. Remove any stickers, protective foil or storage cover from the soleplate.
2. Before filling ensure that the anti-calc filter has been taken out of the tank and
the plug is removed from the wall socket.
3. When cool, remove the water tank from the base and empty any water that is
been left inside, then place the funnel in the opening to the tank.
4. Measure 0.5 litres (500ml) of water into an appropriate container, then pour
into the tank and replace it onto the unit base.
5. Once the tank is full, lift the iron from its base and hold it in your hand. Be
careful to hold the iron at a lower height than the base, as this will help make
the next few steps easier and more effective.
6. With the iron held low, press and hold the steam trigger for up to 30 seconds.
The pump will vibrate and there will be a rumbling sound as it fills up with
water.
7. When this sound becomes less pronounced and steam starts coming out of
the iron, let go of the steam trigger.
8. Your iron is now ready for normal use.
NOTE:
On first use, we recommend cleaning the soleplate with a soft piece of scrap
cloth to ensure any residue from the manufacturing process is removed from it.
9. After filling the steam station, ensure it is placed on a flat, level and stable
surface.
10. Plug the power cord into an unobstructed wall socket then switch it on at the
wall.
11. Set the temperature dial on the iron to the correct temperature for the fabric
that is to be ironed (as shown in the temperature guide) then switch on the
steam generator and the iron via the switches on the base.
12. When the correct temperature is reached for the fabric, the light on the
iron may cycle on and off. This is normal and shows that the thermostat is
operating normally
13. Ensure all switches are in the ‘off’ position when you are finished using the
appliance.
14. Dispose of the packaging in a responsible manner.
4 - Before First Use
