Page of 6
3
WORK AREA
•
Keep work area clean,
free of clutter and well lit.
Cluttered and dark work areas can cause
accidents.
•
Keep children and bystanders
away while operating a Work Bench. Distractions can cause
you to lose control, so visitors should remain at a safe distance from the work area.
•
Be alert of your surroundings.
Using a Work Bench in confined work areas may put you
dangerously close to cutting tools and rotating parts.
PERSONAL SAFETY
•
Stay alert,
watch what you are doing and use common sense when using a Work Bench. Do
not use a Work Bench while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating a Work Bench may result in serious personal injury.
•
Dress properly.
Do not wear loose clothing, dangling objects, or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
•
Use safety apparel and equipment.
Use safety goggles or safety glasses with side shields
which comply with current national standards, or when needed, a face shield. Use a dust mask if
working in dusty work conditions. This applies to all persons in the work area. Also use non-skid
safety shoes, hardhat, gloves, dust collection systems, and hearing protection when
appropriate.
Folding Receiver Work Bench USE AND CARE
•
Do not modify the Work Bench
in any way.
Unauthorized modification may impair the
function and/or safety and could affect the life of the equipment. There are specific applications
for which the Work Bench was designed.
•
Always check for damaged or worn out parts before using the Work Bench.
Broken parts
will affect the Work Bench operation. Replace or repair damaged or worn parts immediately.
•
Do not exceed the Work Bench
load capacity.
•
Distribute the load evenly.
Uneven loads may cause the Work Bench to tip, resulting in
personal injury to the operator or others.
•
Use the Work Bench
on flat and level surfaces
capable of supporting the Work Bench and its
maximum load.
•
Store idle Work Bench.
When Work Bench is not in use, store it in a secure place out of the
reach of children. Inspect it for good working condition prior to storage and before re-use.
ASSEMBLY
1. Install Frame (#13) with Screw (#11) and Spring Washer (#12).
2. Insert Frame (#13) into Receiver Tube (#5), tighten with Bolt (#6), Mount Plate (#7), Washer
(#8), Spring Washer (#9) and Nut (#10) for suitable height.
3. Put Anti-Wobble Block (#2) into Receiver Tube (#5) with Screw (#1).
4. Insert Receiver Tube (#5) into vehicle, secure with Hitch pin (#4) and Clip (#3).
5. Tighten the Anti-Wobble Block (#2) to the hitch receiver with Screw (#1).
