Page of 14
10
10.
After the wire connection, lock the
battery box, seal with the plug, installation
finished.
(See Figure 10)
WARNING:
Read and understand all
instructions.
Failure to follow all instructions
listed below may result in serious injury.
BEFORE USE
1. Check the dolly and make sure all bolts are
tight and the hitch ball mount is secure.
2. Check all the wheels to make sure they are
in good working order, be sure the tire
pressure is 30±2psi(2.1±0.1kg/cm2)
3. Check the battery and make sure the switches are working.
4. Start the dolly before loading onto the trailer and check the dolly can forward and reverse
freely
5. Make sure the trailer weight is no more than 1620kgs/3600Lb and the tongue weight is under
270kgs/600Lb
6. Please use this dolly on flat road only. For your safety, do not use it on a slope over 4 degrees.
No brake is installed so
do not use on the downhill grade.
OPERATION
1. Move the dolly close to the trailer, adjust
the ball hitch mount to correct height. Normally
leave the hitch ball 100-200mm over the weld
spots, tighten the hitch ball mount with latch
and pin.
(See Figure 11)
2. Hold the assembled Ball Mount underneath
the hitch. With the Weld Spots in the correct
position, insert
the Ball into the Hitch and lock
it as normal.
(See Figure 12)
Содержание TMD-3500ETD
Страница 12: ...Page of 14 12 DIAGRAM PARTS LIST ...
