Shortening
the adjuster arm
raises
the trike wheels and places more of the
weight of your motorcycle on the motorcycle wheel. This increases motorcycle
traction and gives a generally softer ride.
1) Loosen jam nuts
2) Shorten adjuster arm by turning adjuster nut
A
toward bolt
C
desired amount.
3) Turn adjuster nut
B
until it tightens against adjuster bracket and adjuster nut
A
4) Tighten nuts
A
and
B
and jam nuts
Lengthening
the adjuster arm
lowers
the trike wheels and places more of the
weight of your motorcycle on the trike wheels. This gives a firmer ride and
increases handling/cornering.
1) Loosen jam nuts
2) Lengthen adjuster arm by turning adjuster nut
B
toward bolt
D
desired amount.
3) Turn adjuster nut
A
until it tightens against adjuster bracket and adjuster nut
B
4) Tighten nuts
A
and
B
and jam nuts
If necessary the pivot bolt and bolts C and D and be loosened for adjustment
Be certain to retighten all bolts after adjustment.
NOTICE: Check all bolts and nuts periodically for tightness
NOTICE: Be sure motorcycle is level after adjustment.
Fender Installation Instructions
(12 Inch wheel only)
1) Attach fender brackets to trike frame with spacers
BETWEEN
fender bracket and frame. Tighten.
NOTE: Leave fender bolts loose until all bolts are inserted.
2) Place gray plastic washers between fender and trike frame/fender bracket. (
4
washers each side)
3) Place fender on frame. Carefully align mounting holes.
4) Insert long bolts first. (
2
each side)
5) Insert short bolts second . (
3
each side)
Insert top bolt first.
6) Carefully tighten bolts. Use care not to over tighten.
