![tousek GSM 420-RS 868 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/tousek/gsm-420-rs-868/gsm-420-rs-868_connection-and-installation-manual_1140536008.webp)
- 8 -
tousek
/ E_GSM-420-RS868_00 / 07. 05. 2018
SMS Befehle / Befehlsgebung
Befehl
Eingabe
10
Save telephone numbers for GATE OPEN-command:
to save telephone numbers that should enable an opening command
on output through a call
(max. 300)
.
pass
:
password (max. 5 digits)
telnr
: telephone number (max. 10 per command separated by comma)
IMPORTANT: the country code (e.g. +43) is, depending on auto-
matic exchange in country, maybe necessary!
It is necessary to send your mobile phone number!
pass,
MAC,telnr,telnr,...
e.g. 12345,MAC,+436641234567,
+436767654321
if behind a tel. number an
„U“, followed by a digit
yyy
is being
entered kann, then this number executes a defined amount of opera
-
tions (in this exapmle: 5), and the number is then deleted.
pass,
MAC,telnrUyyy
e.g. 12345,MAC,+436767654321U5
11
delete telephone numbers for GATE OPEN-command:
to delete telephone numbers that were enabled to generate an ope-
ning command through a call.
pass
:
password (max. 5 digits)
telnr
: telephone number (max. 10 per command separated by comma)
pass,
DAC,telnr,telnr,...
e.g. 12345,MAC,+436641234567,
+436767654321
To delete a phone number using „DAC“, it is necessary to dial it with the same dial code/ prefix
that was used to store it with the command „MAC“!
12
delete all telephone numbers for GATE OPEN-command:
pass
:
password (max. 5 digits)
pass,
DAC,
pass,pass
e.g. 12345,DAC,12345,12345
13
saving a transmitter:
pass
: password (max. 5 digits)
code rk
: serial number of transmitter →
see note
ch
: channel (1–4) - for ch = 9 all channels are being activated
out
: output assigned to channel (1 or 2)
pass,
MEMRKA,code rk,
ch,out,ch,out,ch,out,...
e.g. 12345,MEMRKA,955669,1,1
14
delete a transmitter:
pass
: password (max. 5 digits)
code rk
: serial number of transmitter →
see note
ch
: channel (1–4) - for ch = 9 all channels are being deleted
pass,
DELRKA,code rk,
ch,ch,ch,...
15
delete all transmitters:
pass
: password (max. 5 digits)
pass,
DELRK,AA
Saving / deleting telephone numbers is also possible by means of a call
(see point 3a)
Note
• The serial number of the transmitters is
located on the label close to the battery.
e.g.