Plastic Base Construction Schematic
4
NOTE
: Turf has been cut for
hole orientations shown. Install
panels with holes oriented as
shown (note panel quadrant hole
is located in). Unused corner
hole(s) contain hole filler(s).
ATTENTION
Dimensions are
nominal and depend
on how tightly panels
are together.
ATTENTION
Figure 1
The Prestwick
Panel layout with floating cups and cup
hole fillers installed
Lag Screw fasteners are installed
only in perimeter panel holes. Your
green has been packed with the
appropriate number of fasteners for
perimeter fastening only. See Fig.
6, pg. 8 for fastener installation
instructions and requirements.
Installation Tip
