ToupCam User’s Manual
10
Camera Connect
Connect the Camera to the Microscope
The left hand holds the camera and makes the dust cover down, the right hand rotate the
dust cover clockwise. Keep the interface vertically downward in the process. Connect the
camera with the optical adaptor of microscope photography channel, note: try to keep the
camera and adaptor in a horizontal position during the installation, to prevent tiny dust due to
friction to pollute camera sensor surface and optical center of lens of internal interface.
Connect the Camera to the Computer
Insert the USB cable into a free USB slot on the computer (Requires
USB 2.0 or
USB3.0
port).
“New Hardware Found” or “Installing device driver software” displays at the bottom
right of your PC screen. The camera is recognized.
The found new hardware wizard would start, Select “Install the software
automatically”
Finish (If unidentified publisher/ Windows Logo Testing appear, select continue
anyway)
NOTE
:
Plug the USB connector to board USB port directly on the back of the PC is
recommended,
Do NOT use any other cable to extend the USB cable.
