7
Figure 2-5
Step 3
Log in WEB interface, make corresponding settings upon alarm input and output on the interface
of alarm setup.
Alarm input of WEB is corresponding to the alarm input of I/O port cable. It is to set
corresponding NO, NC input according to the high and low level signal generated when
alarm happens for alarm input device.
Set alarm output on the WEB, alarm output is corresponding to the alarm output end, which
is the alarm output port of the I/O port cable.
Install Waterproof Connector (Optional)
The installation process of waterproof connector for network port is shown in Figure 2-6.
Note
It needs to implement the operation when the device is equipped with waterproof connector and
it is used outdoors.
Figure 2-6
Step 1
Keep the convex groove outward and install the rubber ring into the network port, keep the
smaller hole of the rubber ring outward and install the fixing rubber ring into the main body of the
waterproof connector.
Step 2
Pull the network cable without crystal head through main body of waterproof connector, fixing
rubber ring and waterproof locking cover, make the crystal head of network cable, and then insert
it into the network cable.
IR Bullet Network Camera Quick Start Guide
