Apply a little 5 minute epoxy to the 30 inch
carbon fiber shaft, then insert it in a wing
approximately
2nd flute
from trailing edge
(see photo)
Apply a little 5 minute epoxy to the
2
4
inch carbon fiber shaft then insert it
in a
tail
approximately
1st flute
from
leading edge
(see photo)
©2013 ToughJets, LLC Kittery, ME
Page 9 of 22
Use alignment tool to set vertical
stabilizer angle and make hole in foam
through pre-drilled holes in wing
for
dowels.
Peirce foam with sharp dowel
by
pushing it down flush with the top of
tool
.
see page 10
