Page 7
Strakal Orsel Build Document v1
Now it’s time to solder the two LEDs and white tube holders. These are soldered
on the Frontpanel side of the pcb - opposite to all previous components so far.
First place but don’t solder the LEDS
IMPORTANT: The longer lead of the LED
must go to the square pad on the pcb.
Then place the tube holders - the LED
bulbs should sit around the same level as the top of the holders. This can be
achieved by using masking tape or something similar to hold them in place while
soldering. Now you can solder these components in.
Note: The LED’s supplied with kits have clear lenses but will glow red.
Содержание Strakal Orsel
Страница 2: ...Page 2 Strakal Orsel Build Document v1 ...