TouchTunes DA950-U, Руководство пользователя, Страница: 25 / 32

PowerPack 725
21
PowerPack 725
Installing the DA950-U
1. Unplug the PowerPack 725 from its power outlet.
2. Open the unit to access the connections and the amplifier inside.
3. Disconnect all cables connected to the amplifier:
a) Up to 2 euroblocks
b) Subwoofer cable
c) Power cable
d) CAT-5/RJ-45 cable/connector coming from jukebox
4. Remove the four screws that hold the amplifier in place.
5. Pull the DA950-U out of the PowerPack 725.
6. Set the switches on the replacement DA950-U to 3-channel and Bass Boost ON.
7. Position the replacement DA950-U into the spot previously occupied by the original DA950-U.
8. Fasten the replacement DA950-U using the screws you just removed from the original DA950-U.
9. Reconnect all the cables.
a) Up to 2 euroblocks
b) Subwoofer cable
c) Power cable
d) CAT-5/RJ-45 cable/connector coming from jukebox (into zone 1 input)
10. Check that the switches on the amplifier are set to 3-channel and Bass Boost ON.
11. Plug the PowerPack 725 back into its power outlet, then verify that its subwoofer and the speakers
connected to it are playing the music normally.
Settings and Wiring
B : Bass Boost
set to ON
M : Mode
3-Channel
B M