background image

 

7

 

This next step involves 

GLASS! ALWAYS

 use 

extreme caution

 when handling glass. 

Failure to do so could result in 

personal injury

 or 

property damage.

 

 
 
 
 

Operation 

 

 

Read and understand

 this entire owner’s manual, including 

all safety information

before

 plugging in

 or

 using

 this product. Failure to do so could result in 

electric shock, 

fire, serious injury, or death.

 

Power 

Make sure the ON/OFF switch, located on the left side panel, is in the OFF position. Plug the power 
cord into a 110~120 Volt 15 Amp grounded outlet (see 

IMPORTANT SAFETY INFORMATION

 on 

Pages 2 and 3

). Make sure the outlet is in good condition and that the plug is not loose. 

NEVER

 

exceed the maximum amperage for the circuit. 

DO NOT

 plug other appliances into the same circuit. 

Methods of Operation 

This electric fireplace can be operated by the CONTROL PANEL, located on the right side panel of 
the fireplace (see figure below), or by the battery-powered REMOTE CONTROL.  

The operation and functions of the two methods are the same.   

Before operating, please review the 

IMPORTANT SAFETY INFORMATION

 on 

Pages 2 and 3,

 and 

heed all warnings. 

NOTICE 

When the heater is first turned on, a slight odor may be present. This is normal and 
should not occur again unless the heater is not used for a long period of time. 

 

 

Front View 

 

 

Top View 

 

 
 

 

 

 

 

Rear View 

 

 

Left Side View 

Hot Air 

Vents

Содержание WS-G-01











Отзывы: