Touchstone Whisper Lift II PLUS Upgrade Kit, Руководство пользователя

Страница: 13 / 14

Whisper Lift II PLUS Upgrade Kit
www.touchstonehomeproducts.com 800.215.1990
13
Resetting Lift Mechanism When Lift Loses Power
When the control box loses power, whether through a power outage or unplugging the lift from the wall outlet, the
lift will need to be reset prior to operation. To reset the lift, do the following:
1. Using the manual switch inside of the cabinet, press the DOWN button and allow the lift to go all the way down
inside of the cabinet.
2. Once the lift is all the way down, the lift will be reset. You can now control the lift with either the wireless
remote control or the manual switch.
Battery Replacement
Your remote control takes 2 CRx3032 batteries. To replace the batteries, remove the 3 screws holding the back
cover of the remote in place. Remove batteries and install 2 new batteries.
Setting Child Safety Lock
Security/Child Safety Feature (Lock Mode) : To enable this feature, the lift must be lowered to its lowest
position. Press the DOWN button on the handset and hold for approximately 5 seconds to enable the
Security/Child Safety Feature (Lock Mode). The LED indicator on the control box will flash quickly in orange and
you will hear a single beep indicating the Lock Mode is enabled. All the lift controls (handset, remote controls,
12V trigger, and RS-232 port) are disabled. The orange light will continue to blink quickly as long as the lift
remains in Lock Mode.
Note: Release the DOWN button on the handset once you hear the first beep. If you continue to hold the DOWN
button and hear a second beep, then you will have preformed a different function (Pairing Wireless Remote with
Lift) and the Security/Child Safety Feature will not have been activated.
Active Mode: The lift controls can be enabled temporarily for 5 minutes when the lift is in Lock Mode. Press the
DOWN key once and the UP key twice to enable the Active Mode temporarily. The LED indicator on the control
box will flash slowly in orange and you will hear a short beep indicating the Active Mode is enabled. All the lift
controls (handset, remote controls, 12V trigger, and RS-232 port) will be enabled for 5 minutes; after this period of
time, the lift will automatically switch back to Lock Mode. While in Active Mode, the orange indicator LED will
flash slower than when the lift is in Lock Mode.
Disabling the Security/Child Safety Feature (Lock Mode): Press the UP button once and the DOWN button
twice on the handset while the lift is in Lock Mode to disable the Security/Child Safety Feature (Lock Mode). The
LED indicator on the control box will turn solid green and you will hear two beeps indicating the Lock Mode has
successfully been disabled. All the lift controls (handset, remote controls, 12V trigger, and RS-232 port) will be
enabled.