Lumenex Series Electric Fireplace
www.touchstonehomeproducts.com
800.215.1990
9
Hard Wire Connection
If it is necessary to hard wire this appliance, a qualified electrician must remove the cord connection, and wire
the appliance directly to the house hold wiring.
This appliance must be electrically connected and grounded in accordance with local codes, if hard wired. In
the absence of local codes, use the current ANSI/NFPA 70 NATIONAL ELECTRICAL CODE in the United States
or the current CSA C22.1 CANADIAN ELECTRICAL CODE in Canada.
A.
Remove the cover plate from the left side
B.
Remove the wire connectors from the power
bottom of the appliance by removing the three cord. Keep power cord, in case needed in future.
screws, as shown above. Save screws for
installation of new cover plate. (figure 1)
C.
Take the new cover plate and punch a 7/8”. Thread your wiring through the hole in the cover plate for
connecting to the wires in the LUMENEX fireplace.
D.
Using the wire connectors, connect the ground green wires (G), the common white wires (N)
together, then the hot black wires (L) and then the refer to Figure 3.
E.
Reinstall the cover plate using the three screws, as shown in Figure 1.
Содержание 87026
Страница 2: ...Lumenex Series Electric Fireplace www touchstonehomeproducts com 800 215 1990 2 ...
Страница 22: ...Lumenex Series Electric Fireplace www touchstonehomeproducts com 800 215 1990 22 Notes ...
Страница 23: ...Lumenex Series Electric Fireplace www touchstonehomeproducts com 800 215 1990 23 ...
Страница 24: ...Lumenex Series Electric Fireplace www touchstonehomeproducts com 800 215 1990 24 ...