© 2015 Touchjet Pte Ltd. Page9 www.touchjet.com
Stylus
Using infrared (IR) sensor technology in the device and included stylus, users
can control and interact with Touchjet touchscreen projections. The stylus
contains a tiny infrared emitter that is captured by a built-‐in infrared camera
and translated into standard input for the Android system. Our IR sensor can
even support two styli for multi-‐touch apps. The stylus is fully compatible
with any existing Android application. Your Touchjet Pond kit comes with 2
Styli that can be used by two people simultaneously for applications and
games. Two additional styli may be used simultaneously for up to four users
(extra styli must be ordered separately).
The Teflon point of the Stylus contains a small infrared (invisible) light
source that can be detected and located by the Projector. This light source is
activated when you touch the projection surface or press the small Pointer
Button (A). The longer Power Switch (B) is a slide switch to turn on power to
the device. Power is turned on when the slide switch is pushed toward the
Stylus tip, covering the small indent mark. It is turned off when pushed in
the opposite direction. To check that the power is on and the batteries are
still good, push the Pointer Button and look at the tip in a darkened
environment or your cupped hand – you should see a faint red glow.