background image

IMPORTANT SAFETY INSTRUCTIONS

1. Please read these instructions carefully before using the product and keep them 
safe for later reference.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet (power socket) before cleaning. Clean 
the product with a damp soft cloth. Do not use liquid or aerosol cleaners as it may 
cause permanent damage to the screen.

4.  Caution  of  use  varies  from  model  to  model;  please  observe  appropriate 
operation as per model in use.

5.  Do  not  place  this  product  on  an  unstable  cart,  stand,  or  surface  which  may 
cause damage or harm to the product or individual.

6. Slots and openings on the cabinet, in the back cover or in the bottom, are for 
ventilation;  to  ensure  reliable  operation  and  to  prevent  from  overheating,  these 
openings must not be blocked or covered at any time. The openings should never 
be  placed  near  or  over  a  radiator,  heat  source,  or  placed  in  a  built-in  installation 
unless proper ventilation space (min. 2 inches/5cm of gap) is provided.

Section 1

IMPORTANT SAFETY INSTRUCTIONS

Please read these instructions carefully before 
using the product and keep them safe for 
future reference.

Safety Instructions

2

Содержание LCD Duo
























Отзывы: