VESA Mount for Your Monitor
This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface
Standard which de
fi
nes a physical mounting interface for
fl
at panel monitors, and
corresponding with the standards of
fl
at panel monitor mounting devices, such as wall and
table arms. The VESA mounting interface is located on the back of your monitor.
To mount the monitor on a UL certi
fi
ed swing arm or other mounting
fi
xture, follow the
instructions included with the mounting
fi
xture to be used.
100.0 mm
100.0 mm
126.0 mm
75.0 mm
75.0 mm
12.5 mm
Slots (x4)
B
B
B
B
A
A
A
A
VESA
Mounting
Interface
* A/B: The distance betw
een the back cover surface and the bottom of the
screw hole is 8 mm.
!
Warning!
Please select the proper screws!
Please use four M4 screws diameter with proper length to mount your monitor.
Please note: the mounting stand must be able to support at least 13.2 lbs(6Kg).
The dimension of the mounting device must be equal or less than the VESA
Mounting interface recess area. There is no any gap allowed between two
mounting plates.
10
