Touch-plate Nexus NEX-MB-XX Скачать руководство пользователя страница 3

Page 2

www.touchplate.com

Touch-Plate® Lighting Controls

Nexus System Manual 

Precautions

The Nexus hardware is designed to be in environments that have a temperature range of 0-60°C 
(non-condensing atmosphere).  Installing in an environment outside of these parameters will shor t-
en the life span of the hardware.

Touch-Plate recommends the use of 18 to 22 AWG wire for low voltage wiring of contact closure 
products, 18 AWG wire for all 24V power connections, and 16 AWG wire for 2-wire Smar t Switch     
Stations.

All 120VAC wiring must use wire as specified by National Electric Code for load size and wire length.

Compatible Hardware

• 

Digital Control Stations 

• 

2-Wire Stations (Mystique and Ultra Series)

• 

5-Wire Stations (Mystique and Ultra Series)

• 

Contact Closure Control Stations via Smar t Control Bridge or on board inputs

• 

Panel Products (Solare, Soluxe, Calypso, and ZoneZ Series)

Warranty

Touch-Plate warrants this product against defects in materials or workmanship, under normal use, 
for a period of ONE (1) year from date of shipment.  If a defect arises and a valid claim is received 
within the Warranty Period, Touch-Plate will repair or replace the product at no charge.

This warranty does not apply to:

a.  Damage to unit(s) caused by accident, acts of God, inappropriate installation, faulty 

installation, or any negligent use;

b.  Unit(s) which have been subject to being taken apar t or other wise modified;
c.  Unit not used in accordance with instructions;
d.  The finish on any por tion of the product, such as sur face and/or weathering, as this 

is considered normal wear and tear;

e.  Non-Touch-Plate hardware installed by the user;
f.  Damage caused by Non-Touch-Plate products; 
g.  Damage caused by operating the product outside the permitted or intended uses 

described by  Touch-Plate; 

h.  -or- Specific plans or Specific application requirements, unless the plans and       

specifications have been for warded to Touch-Plate and Touch-Plate has approved 
and accepted the plans in writing.

EXCEPT AS PROVIDED IN THIS WARRANTY, TOUCH-PLATE IS NOT RESPONSIBLE FOR DIRECT, SPECIAL,             
INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, 
INCLUDING BUT NOT LIMITED TO, INSTALLATION OR REPLACEMENT LABOR COSTS.

Содержание Nexus NEX-MB-XX



















Отзывы: