Totoku LVU2E1, Руководство пользователя

Страница: 13 / 60

ENGLISH
- 11 -
For multi-display environments on Windows 2000:
2K-1: Access the
Display Properties
dialog box and click the
Settings
tab.
2K-2: Select "Ture Color (32bit)" from the
Colors
drop-dowm menu.
2K-3: Set a resolution using the
Screen Area
slider.
2K-4: Click "Advanced" on the
Settings
tab, and another dialog box appears.
2K-5: Select the
Quadro FX 1500
tab, and a popup menu appears to the side.
Note:
When another graphics card coexists, the
Quadro FX 1500
tab will not appear.
In that case, a display on another card needs to be detached for now. Right-click
the subject display icon on the
Settings
tab and uncheck "Attached" on the right-
click menu, or uncheck "Extend my Windows desktop onto this monitor."
2K-6: Select "nView Display Settings" from the menu and "Dualview" from the
nView
Display Mode
drop-down menu on the
Qadro FX 1500
tab and click "OK."
Note:
See Chapter 4 for detailed information on multi-display modes.
2K-7: When a message prompting restart of the computer appears, click "Restart now."
2K-8: After restarting the computer, click "Finish" on the NVIDIA Dualview installation
completion message.
2K-9: A message prompting restart of the computer appears again. Restart the computer.
(Go on to
All users
below or
Portrait orientation on ME201L/ME251i/CCL202/
CCL212/CCL250i
on page 13.)
All users:
1
Select
Display Properties>Settings
(tab).
Select a display icon, and if the
Display
section says "Plug and Play monitor on Elza
TOTOKU LVU2E1," the corresponding display is connected to LVU2E1.
2
In a multi-display setup, select the icon for the fi rst display on this card and verify
"Extend my Windows desktop onto this monitor" is checked.